16CH H.264 HDMI&BNC Video hdmi encoder iptv

16CH H.264 HDMI&BNC Video hdmi encoder iptv

16 channels hdmi+cvbs H.264 hdmi encoder iptv in rack 1. Support H.264 Baseline Profile /H.264 Main Profile / H.264 High Profile 2. Support up to 720P, 1080P HD video input 3. Support HDCP protocol and HD blue-ray 4. Support protocol HTTP,UTP,RTSP,RTMP,ONVIF

Product details

Brief Introduction


This HDMI +BNC video encoder will take lower bandwidth to get high definition video signal, it adopts H.264 encoding format, and can encode video & audio at the same time .

Its output TS dual stream design can make it to set the resolution of code steam of every channel according to different requirement .Its high integration and cost-effective design make this device widely used in IPTV systems . Beside, the system is more stable also it supports VLC decode.


Product Feature


  • HDMI+BNC (CVBS) dual interface input at real time

  • Support ONVIF protocol and NVR recording

  • It adopts standard H.264 coding format

  • Audio coding support MPEG1 Audio Layer2

  • CBR/VBR/ABR code rate controlling , 16kbit/s~16Mbit/s

  • Support Network interface full-duplex mode 1000M

  • Support HTTP,UDP,RTSP,RTMP protocol and support unicast &

  •     multicast

  • The video stream output format : TS/VES/AES ect.

  • Clean WEB dashboard, Chinese and English are optional.

  • Support the double streaming output, main streaming + second streaming

  • Be able to select different streaming resolution.

  • Support decoding for multi-brand set up box

  • Support transmit in WAN and LAN .

  • Support HDCP .




  • As HD encoder for IPTV

  • Digital HD/SD streaming sever.

  • Video conference

  • Replace HD Video Capture Card

  • Hotel cable TV system

  • live and recording broadcast for operating room.

  • live and recording broadcast for education

  • Digital HD live and recording broadcast for courtroom.

  • Access to network monitoring platform, support recording broadcast




Model number



16 inputs

interface type


max resolution


16 outputs

interface type


signal standard

standard network stream

protocol type



L * W * H

48.1cm * 30cm * 13.3cm




AC 220V±10%,50/60Hz

Work temperature


Storage temperature

 -20℃ -85℃


Ⅴ. System settings

When in WEB control interface, the computer’s IP needed be modified as IP 192.168.1.*. the encoder’s default IP is

Reset&Initial: there is a RST on the panel, which can be used for HD video encoder being reseted and initialized. Under condition of power on, keep pressing the RST for 10 seconds ,it will restart, which can make parameters be initialized. Then the IP will be initialized as

1. Set the IP address as 192.168.1.*   note:* can be any number among 0-254 except 168

2. Open up IE, input to WEB interface , username: admin  password: admin

3. HDMI status


3.1 access address: can be directly copied into VCL player to decode.

3.2 Video parameter: video signal parameter input

3.3 Audio parameter: audio signal parameter input

3.4 Hardware status: when the interrupt number rises, it means there is video inputting, when the number is “0”, it means there is no video inputting. Then the input signal need be checked.

4. Network settings

Note: the encoder’s default IP is if you forget the IP address after you modify it, you can keep pressing the RST for 10 seconds ,it will restart, which can make parameters be initialized.

5.HDMI coding settings

5.1 : video and audio parameter settings

Note: the parameters can be adjusted according to practical application

5.2 : Network transmission protocol Settings

Note: on condition of HTTP protocol, the player can be played without HDMI.

6.the second stream settings:

Note: the configuration parameters is same as the main stream

7.RTMP protocol settings

7.1 Set H.264 level : baseline profile

7.2 Set RTMP protocol : Enable

7.3 Set RTMP sever IP

7.4 Set RTMP sever port

7.5 Set RTMP stream name

7.6 Sever test:

7.6.1  Instal software: Flash+Media+Sever3.5 there’s no need for serial number when install, both username and code are “1”.

7.6.2  start background software:

7.6.3Open up the file of FlashPlayer : VideoPlayer.html

7.6.4Type in : rtmp://ip address /rtmp/hdmi ,choose live, then can see the image or type in:rtmp://  choose:LIVE  click:Play stream


8.System settings

9. Chinese & English switch

10. HDMI OSD settings

Note: if no need for watermarks, space should be entered in “text”.

Ⅵ VLC decoding configuration 

1.VLC playing settings 

VLC software version NO: 2.0.1

Note:under HDMI protocol condition,the suffix added is not necessary.

2.VLC videorecording settings

Click: play

Similar Product:



If you wanna press a sample plz click this button:

If you want to wholesale 16ch h.264 hdmi&bnc video hdmi encoder iptv from a such factory, Mine Technology is one of the leading H.264 HDMI & CVBS Encoder manufacturers and suppliers.

Related Products

Our Service


Contact Us

Address:Floor 6th, Building C, Minle Industrial Park, Meiban Ave, Minzhi Street, Longhua District, Shenzhen City, Guangdong Province, P.R.C.

Tel: +86-755-83271813

Fax: +86-755-83048160

E-mail: info@mine.com.cn

CopyRight© Mine Technology Co.,Ltd.