SD100USB Plus: USB Capture SDI Plus

SD100USB Plus: USB Capture SDI Plus

Capture SD/HD/3G/ 2K SDI + embedded audio; Loop-through SD/HD/3G/2K SDI; Audio input via Line in; Extract SDI embedded audio and output via Line out

Product details
Supported OS
  • Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)

  • Linux (Ubuntu 12.04–16.10, CentOS 7)

  • OS X 10.9–10.11

  • macOS 10.12

Supported APIs
  • Windows

    • DirectShow

    • Wave API/DirectSound/WASAPI

  • Linux

    • V4L2

    • ALSA

  • OS X/macOS

    • QuickTime

    • AV Foundation

Supported Software
  • VLC

  • VirtualDub

  • OBS

  • XSplit

  • vMix

  • VidBlaster

  • Wirecast

  • Microsoft Media Encoder

  • Adobe Flash Media Encoder

  • Any other DirectShow, V4L2, QuickTime,AV Foundation bbased encoding or streaming software

Input Interfaces
  • BNC

    • SD/HD/3G SDI

  • 3.5mm audio jack

    • unbalanced Line In interface

Output Interfaces
  • USB 3.0

    • compatible with USB 2.0

    • compatible with USB 3.1 Gen 1

  • 3.5mm audio jack

    • unbalanced Line Out interface

  • BNC

    • SDI loop-through interface

Input Features
  • Support for up to 2048×1080 input resulution

SDI Specific Features
  • Integrated cable equalizer supporting cable lengths up to 140M for 3G-SDI signals

  • Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards

  • Support for 2K (2048×1080) mode

  • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

  • Support for 10/12-bit color depth

  • Support for extraction of SMPTE 352 payload identifier

  • Support for up to 8 (mono) audio channels at 48KHz

  • Support for extraction of audio formation information & channel status data

  • Limited support of 3Gb-DS: only the first stream can be captured

  • Limited support for capture of the first link of dual link interfaces:

    • YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60

    • YCbCr 4:4:4 10-bit: captured as 4:2:2

    • RGB 4:4:4: R/B sub-sampled

Analog Audio Features
  • Extract the embedded SDI audio and output via 3.5mm unbalanced Line out

  • Capture analog audio via 3.5 mm unbalanced Line In interface

Video Capture format
  • Support for capture resolutions up to 2048×1080

  • Support for output frame rates up to 60fps. (Actual output frame rate can be limited by the USB bandwidth)

  • Support for YUY2 4:2:2 8-bit

  • More capture format can be set using USB Capture Utility

Video Processing Features
  • Video processing pipelines with 160 Mpixels/s processing bandwidth

  • Video cropping

  • Video scaling

  • Video de-interlacing

    • Wave

    • Blend top & bottom field

    • Top field only

    • Bottom field only

  • Video aspect ratio conversion

    • Auto or manual selection of input aspect ratio

    • Auto or manual selection of output aspect ratio

    • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)

  • Video color format conversion

    • Auto or manual selection of input color format & quantization range

    • Auto or manual selection of output color format, quantization range & saturation range

    • Support for RGB, YCbCr 601, YCbCr 709 color formats

    • Support for Limited or Full quantization range

    • Support for Limited, Full & ‘Extended gamut’ saturation range

  • Video frame rate conversion

Multiple devices on one computer
  • Support for connecting multiple USB devices to one system

  • Support for setting the device serial number as the device name shown in the system using USB Capture Utility

SDK
  • The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.

Firmware Upgrade
  • Multiple devices in one system can be upgraded simultaneously

LED Indicator
  • Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

Form Factor
  • 110.7mm (L) x 56.8mm (W) x 17mm (H)

Power Consumption
  • 5V max current: ~0.5 A

  • max power consumption: ~2.5 W

Working Environment
  • Operating temperature: 0 to 50 deg C

  • Storage temperature: –20 to 70 deg C

  • Relative Humidity: 5% to 90% non-condensing


If you want to wholesale sd100usb plus: usb capture sdi plus from a such factory, Mine Technology is one of the leading USB Video Capture Card manufacturers and suppliers.

Hot Tags: sd100usb plus: usb capture sdi plus manufacturers, suppliers, factory, wholesale
Related Products
Feedback

Our Service

Feedback

Contact Us

Address:Floor 6th, Building C, Minle Industrial Park, Meiban Ave, Minzhi Street, Longhua District, Shenzhen City, Guangdong Province, P.R.C.

Tel: +86-755-83271813

Fax: +86-755-83048160

E-mail: info@mine.com.cn

CopyRight© Mine Technology Co.,Ltd.