Pro Capture AIO 4K -HS102-4K

Pro Capture AIO 4K -HS102-4K

One channel UHD capture card Captures one of the following SDI + embedded audio HDMI + embedded audio

Product details

HS102-4K


Supported OS

Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)

Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)

Supported APIs

Windows

DirectShow

DirectKS

Wave API/DirectSound/WASAPI

Linux

V4L2

ALSA

Supported Software

VLC

VirtualDub

OBS

XSplit

vMix

VidBlaster

Wirecast

Microsoft Media Encoder

Adobe Flash Media Encoder

Any other DirectShow/V4L2 encoding/streaming software

Input Interfaces

HDMI

DVI-D 1.0

HDMI 2.0

BNC

SD/HD/3G/6G SDI

Output Interfaces

PCIe Gen2 x4

Input Features

Auto scan of video input sources when there is no signal input to the currently selected input source

Manual selection of video input source

Auto selection of linked (embedded) audio input source when the video input source changes

Manual selection of audio input source

Support for standard crossbar based on video input source selection

Support for input video resolutions up to 4096x2160 pixels

HDMI Specific Features

594MHz HDMI receiver

Adaptive HDMI equalizer

Support for customized EDID

Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames

Full colorimetry support

Support for 8/10/12-bit color depths

Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

Support for up to 8-channel IEC60958/IEC61937 audio streams

Support for extraction of audio formation information & channel status data

Support for extraction of video timing information

Support for extraction of 3D format information

Support for extraction of Sony/Canon DSLR time code

Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

SDI Specific Features

Integrated cable equalizer supporting cable lengths up to 230M for HD signals

Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards

Support for 2K (2048x1080) & 4K (4096x2160) mode

Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

Support for 10/12-bit color depth

Support for extraction of SMPTE 352 payload identifier

Support for up to 8 (mono) audio channels at 48KHz (channels 1–8 from the 16 available in the SDI

spec)

Support for extraction of audio formation information & channel status data

Limited support of 3Gb-DS: only the first stream can be captured

Limited support for capture of the first link of dual link interfaces:

YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60

YCbCr 4:4:4 10-bit: captured as 4:2:2

RGB 4:4:4: R/B sub-sampled

Video Output Formats

Support for output image resolutions up to 4096x2160 pixels

Support for output frame rates up to 144fps (Actual output frame rate can be limited by PCIe

bandwidth & image resolution)

Support for 4:2:0 8-bit output formats: NV12, I420, YV12

Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY

Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32

Support for 4:4:4 10-bit output formats: V410, Y410

More output formats are supported via Pro Capture SDK for DirectKS

Video Processing Features

Two video processing pipelines with ~720Mpixels/s processing bandwidth for each one

Full 10-bit video processing

Video cropping

Video scaling

Video de-interlacing

Wave

Blend top & bottom field

Top field only

Bottom field only

Video aspect ratio conversion

Auto or manual selection of input aspect ratio

Auto or manual selection of output aspect ratio

Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox

or Pillarbox)

Video color format conversion

Auto or manual selection of input color format & quantization range

Auto or manual selection of output color format, quantization range & saturation range

Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats

Support for Limited or Full quantization range

Support for Limited, Full & ‘Extended gamut’ saturation range

Video frame rate conversion

Video OSD composition

Support for PNG OSD image (up to 4096x2160)

Support for dynamic loading of RGBA OSD image via SDK

Multiple Cards per System

Support for multiple cards plugged to one system

On-board rotary switch to set card number, with 16 positions from 0 to F

System hardware device tree will display “01: Pro Capture AIO 4K+” when rotary switch is set to 1,

and so on

The video and audio device names displayed in your software will include the card number (set by

the rotary switch)

Multiple Output Streams

Unlimited output streams for any one input channel

Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color

adjustment settings for each individual stream

Ultra Low Latency Support

Latency of 64 video lines

Partial notification mode in SDK

Timestamp & A/V Synchronization

Hardware based 100ns high resolution clock

Audio frames (192 audio samples) & video frames are stamped with hardware clock

Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA

~1600MB/s per channel DMA bandwidth in PCIe 2.x system

~800MB/s per channel DMA bandwidth in PCIe 1.x system

Support for auto detection of Intel tiled GPU surface

Support for DirectGMA for AMD video adapter chipsets

Support for GPUDirect for Nvidia video adapter chipsets

SDK

Pro Capture SDK for DirectShow for easy integration (Windows)

Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

Windows Driver Tweaks

All options can be controled by three levels of registry key: global level, product level and device level

Video, Audio, Crossbar filter names can be customized via registry keys

Firmware Upgrade

Multiple cards in one system can be upgraded simultaneously

Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not

needed)

LED Indicator

Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or

FPGA configuration failed.

Form Factor

Low profile PCIe x4 Add-on Card

140mm x 68.88mm (without PCI bracket)

Power Consumption

Max current at 12V 1A

Max current at 3.3V 1.5A

Max power consumption 15W

Working Environment

Operating temperature: 0 to 40 deg C

Storage temperature: –20 to 70 deg C

Relative Humidity: 5% to 90% non-condensing


If you want to wholesale pro capture aio 4k -hs102-4k from a such factory, Mine Technology is one of the leading 4K Capture Card manufacturers and suppliers.

Related Products
Feedback

Our Service

Feedback

Contact Us

Address:Floor 6th, Building C, Minle Industrial Park, Meiban Ave, Minzhi Street, Longhua District, Shenzhen City, Guangdong Province, P.R.C.

Tel: +86-755-83271813

Fax: +86-755-83048160

E-mail: info@mine.com.cn

CopyRight© Mine Technology Co.,Ltd.