Pro Capture HDMI 4K Plus Card-HD100-4K Pro

Pro Capture HDMI 4K Plus Card-HD100-4K Pro

HD100-4K Pro One channnel UHD capture card HDMI + embedded audio

Product details

HD100-4K Pro


Supported OS

Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
will be compatible with Linux soon

Supported APIs

Windows
– DirectShow
– DirectKS
– Wave API/DirectSound/WASAPI

Supported Software

VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software

Input Interfaces

HDMI
– DVI-D 1.0
– HDMI 2.0

Output Interfaces

PCIe Gen2 x4

Input Features

Auto scan of video input sources when there is no signal input to the currently selected input source
Manual selection of video input source
Auto selection of linked (embedded) audio input source when the video input source changes
Manual selection of audio input source
Support for standard crossbar based on video input source selection
Support for input video resolutions up to 4096×2160 pixels

HDMI Specific Features

594MHz HDMI receiver
Adaptive HDMI equalizer
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for 8/10/12-bit color depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for up to 8-channel IEC60958/IEC61937 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode

Video Output Formats

Support for output image resolutions up to 4096×2160 pixels
Support for output frame rates up to 120fps. (Actual output frame rate can be limited by PCIe bandwidth & image resolution)
Support for 4:2:0 8-bit output formats: NV12, I420, YV12
Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32
Support for 4:4:4 10-bit output formats: V410, Y410
More output formats are supported via Pro Capture SDK for DirectKS

Video Processing Features

Two video processing pipelines with ~720Mpixels/s processing bandwidth
Full 10-bit video processing
Video cropping
Video scaling
Video de-interlacing
– Wave
– Blend top & bottom field
– Top field only
– Bottom field only
Video aspect ratio conversion
– Auto or manual selection of input aspect ratio
– Auto or manual selection of output aspect ratio
– Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
– Auto or manual selection of input color format & quantization range
– Auto or manual selection of output color format, quantization range & saturation range
– Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
– Support for Limited or Full quantization range
– Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Video OSD composition
– Support for PNG OSD image (up to 4096×2160)
– Support for dynamic loading of RGBA OSD image via SDK

Multiple Cards per System

Support for multiple cards plugged to one system
On-board rotary switch to set card number, with 16 positions from 0 to F
System hardware device tree will display “01: Pro Capture HDMI 4K+” when rotary switch is set to 1, and so on
The video and audio device names displayed in your software will include the card number (set by the rotary switch)

Multiple Output Streams

Unlimited output streams for any one input channel
Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream

Ultra Low Latency Support

Latency of 64 video lines
Partial notification mode in SDK

Timestamp & A/V Synchronization

Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA

~1600MB/s per channel DMA bandwidth in PCIe 2.x system
~800MB/s per channel DMA bandwidth in PCIe 1.x system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets

SDK

Pro Capture SDK for DirectShow for easy integration (Windows)
Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)

Windows Driver Tweaks

All options can be controlled by three levels of registry key: global level, product level and device level
Video,Audio, Crossbar filter names can be customized via registry keys

Firmware Upgrade

Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)

LED Indicator

Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

Form Factor

Low profile PCIe x4 Add-on Card
140mm x 68.88mm (without PCI bracket)

Power Consumption

Max current at 12V TBD
Max current at 3.3V TBD
Max power consumption TBD

Working Environment

Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing


If you want to wholesale pro capture hdmi 4k plus card-hd100-4k pro from a such factory, Mine Technology is one of the leading 4K Capture Card manufacturers and suppliers.

Related Products
Feedback

Our Service

Feedback

Contact Us

Address:Floor 6th, Building C, Minle Industrial Park, Meiban Ave, Minzhi Street, Longhua District, Shenzhen City, Guangdong Province, P.R.C.

Tel: +86-755-83271813

Fax: +86-755-83048160

E-mail: info@mine.com.cn

CopyRight© Mine Technology Co.,Ltd.